Thermospan™ 125
Insulated Sectional Steel Doors

Energy Efficiency Values
U-Value = .093
R-Value = 10.79

Two 1-3/4" integral roll formed struts per section add rigidity and strength.

18 gauge hot-dipped galvanized steel "wrap around" end caps offer interior hinge attachment surface and exterior leg for proper seal against jamb.

Solid polyurethane core adds to insulating efficiency.

Extended Limited Warranty
TEN (10) YEARS against cracking, splitting or deterioration due to rust. SEVEN (7) YEARS against separation of polyurethane from the steel skin of the panel. Contact us for up-to-date warranty information. (April, 2003).

Thermospan™ 150
Insulated Sectional Steel Doors

Energy Efficiency Values
U-Value = 0.0706
R-Value = 14.16

Flush door embossed pinstriping (grooves) on outer skin adds strength and non-repeating random stucco exterior enhances appearance. Also, available with embossed woodgrain raised panel exterior (limited sizes).

Prepainted inner and outer skins for added corrosion-resistance. Note: Both skins are also hot dipped galvanized steel for futher protection against corrosion.

Two 1-3/4" roll-formed struts per section add rigidity and strength.

18 gauge "wrap around" end caps offer interior hinge attachment and surface and exterior leg for proper seal against jamb.

Solid polyurethane core adds to insulating efficiency

Joint seal prevents air infiltration and saves energy.

Thermal break separates inner and outer skins at top and bottom so no heat or cold is conducted through the section.

Extended Limited Warranty
TEN (10) YEARS against cracking, splitting or deterioration due to rust. SEVEN (7) YEARS against separation of polyurethane from the steel skin of the panel. Contact us for up-to-date warranty information. (April, 2003).

Thermospan™ 200
Insulated Sectional Steel Doors
A Long and Virtually Maintenance-Free Life!

Energy Efficiency Values
U-Value = 0.067
R-Value = 14.962

Thermal break separated inner and outer skins so virtually no heat or cold is conducted through section.

Prepainted inner and outer skins for added corrosion resistance. Note: Both skins are also hot dipped galvanized steel for futher protection against corrosion.

Solid polyurethane core provides maximum thermal efficiency and adds to quiet operation and strength.

Two 1-3/4" rolled formed struts per section add rigidity and strength.

Two inch nominal thickness.

Extended Limited Warranty
TEN (10) YEARS against cracking, splitting or deterioration due to rust. SEVEN (7) YEARS against separation of polyurethane from the steel skin of the panel. Contact us for up-to-date warranty information. (April, 2003).